16
LD2342 V1.4 Page 16 of 22
SRT Marine Technology
User guide
SRT-MTB
©
proAIS Application
Software update tab
This tab provides the facility to update the AIS Transceiver's internal software.
L
CAUTION:
Only perform a software update using an update file intended for use with the AIS500 product.
Do not interrupt the power to the unit or disconnect from the PC during the update process unless instructed
to do so by the proAIS application.
1. Click the 'Select update file' button and navigate to the update file. This will have the extension .hex.
2. Click the 'Start update button'.
3. Follow the instructions provided underneath the update progress bar.
4. Depending on the AIS software version you may be requested to power cycle the unit at two points in the process.
Turn the power supply to the AIS off and back on again at these requests. Do not disconnect the serial connection to
the PC.
5. Once the 'Update completed' is displayed the AIS is ready for use.
6. Please verify the information shown on the static data tab is correct after any software update.
Summary of Contents for AIS500
Page 1: ...LD2342 V1 4 Page 1 of 22 SRT Marine Technology...
Page 2: ...2 LD2342 V1 4 Page 2 of 22 SRT Marine Technology User guide SRT MTB proAIS Application...
Page 20: ...20 LD2342 V1 4 Page 20 of 22 SRT Marine Technology User guide SRT MTB proAIS Application...
Page 23: ...LD2342 V1 4 Page 23 of 22 SRT Marine Technology User guide SRT MTB proAIS Application...
