42 Raymarine 37STV Satellite TV System
To position using an absolute angle:
1. Click ‘
Move Antenna - Execute Diagnosis
’ in the menu
options. The move antenna screen appears.
2. Click ‘
Setup
’. The GUI enters set up mode.
3. Enter the azimuth (AZ) and elevation (EL) angle values in the
corresponding ‘
Target
’ boxes of the ‘
Go to position
’ box.
4. Click ‘
Go to Target Position
’. The antenna will move to the
new target position.
5. Click ‘
Restart
’. The system leaves set up mode and the
antenna starts tracking.
To position using a relative angle:
1. Click ‘
Move Antenna - Execute Diagnosis
’ in the menu
options. The move antenna screen appears.
2. Click ‘
Setup
’. The GUI enters set up mode.
3. Enter the angle that you want the antenna to move to in the
relevant boxes of the ‘
Move Step
’ box. The box marked with
up/down arrows will adjust the EL position, the box marked
with left/right arrows adjusts the AZ position.
4. Click the arrow corresponding to the direction that you want
the antenna to move.
5. Click ‘
Restart
’. The system leaves set up mode and the
antenna starts tracking.
Antenna diagnosis
The antenna diagnosis function automatically tests the operation
of the system and shows its status.
To carry out antenna diagnosis:
1. Click ‘
Move Antenna - Execute Diagnosis
’ in the menu
options. The move antenna screen appears.
2. Click ‘
Setup
’. The GUI enters set up mode.
3. Click the ‘
Diagnosis
’ soft key. Antenna diagnosis is
automatically carried out.
As each function is tested the result is shown by the circle
next to the function title in the diagnosis box changing color.
• Blue - shows the function is operating correctly.
• Green - shows the function is being tested.
• Red - shows that there is a fault with that function.
If a fault is diagnosed refer to “Troubleshooting” on page 43
for possible solutions.
4. Click ‘
Restart’
. The system leaves set up mode and the
antenna starts tracking.
81304_2.book Page 42 Thursday, March 26, 2009 3:59 PM
