21
Operation
Introduction
This section of the handbook describes how to set up your
Raymarine Satellite TV System after installation using the ACU
or the Graphical User Interface (GUI) and includes the following
functions:
•
System start up.
•
Changing the default satellite.
•
Monitoring the antenna status.
•
Entering set up mode.
•
Setting the satellite pair.
•
Setting the GPS.
•
Editing satellite information.
•
Setting the local frequency.
•
Setting the DiSEqC method.
•
Display versions.
•
Setting antenna go position.
•
Setting antenna move step.
•
Setting the factory default parameters.
•
Performing diagnostic tests.
Many of the above functions will only be required at initial
installation of your system.
Note: The satellite names shown on the ACU screen in the
following illustrations may differ from those on your ACU
depending on your geographic location.
Set up using the ACU
ACU soft keys
The ACU soft keys are used for the following functions:
Start up
With the system installed and power applied, the ACU screen
will show the following sequence:
1. Communication is being
established between the
antenna and the ACU.
2. The antenna is initialized.
BACK
ENTER
Press to select
on-screen option
D10586_1
INITIALIZE ACU
RAYMARINE 37STV
D7964_2
INITIALIZE ANTENNA
RAYMARINE 37STV
D7965_2
81304_2.book Page 21 Thursday, March 26, 2009 3:59 PM
