5
Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C20000M-CE
CAUTION:
The fiber optic cable and output head are precise optic instrument, ANY
vibration or impact to the output head, and twist or excessive bend to the cable will
damage the instrument.
2.4. Operation Environment
The operation conditions are listed as the following table:
Table 1The Operation Environment Conditions for the Laser
Model
RFL-C20000M-CE
Supply voltage (V)
Three-phase four-wire systemAC 323V~AC 437V
、
50/60Hz (including PE)
Power supply capacity
(kVA)
>
65
Water cooling flow
(L/min)
>
167
Installation
Environment
Flat, no vibration nor impact
Ambient Temperature
10
℃~
40
℃
Relative Humidity
＜
70%
a) Make sure the product is properly grounded before use.
b)The laser output head is connected with fiber optic cable. Please inspect the output head carefully
for dust or other contaminations. Use appropriate lens paper to clean it if necessary.
c) Failure to follow the instructions when operating the laser may cause malfunction and damage.
d)It is not allowed to install the output head when the laser is in operation.
e) Do not look into the output head directly. Wear appropriate protective eye glasses all the time
when operating the laser.
Tips: Install the laser in an air-conditioned environment for longer life and better performance.
2.5. Attentions
a) Make sure that the correct voltage of 380VAC is used. Connecting failure of power supply will
damage the device.
b)The output laser is collimated by the collimating lens, it is important to keep the collimating lens
clean, otherwise it will damage the device.
c) Please cap the output head when it is not in use. Do not touch the output lens at anytime. Use
appropriate lens paper to clean it if necessary.
d)Safetykeep the cap when using the laser. To avoid dust, make sure the opening direction of the cap
is put down.
e) Failure to follow the instructions may cause laser power loss, such loss is not covered by warranty.
