武汉锐科光纤激光技术股份有限公司
WUHAN RAYCUS FIBER LASER TECHNOLOGIES CO. LTD.
16
Pulse mode wave diagram
Figure 10
Pulse mode wave
3.4.2
RS232 Mode
RS-232 mode is a remote control mode. In this mode, we have a protocol
for communication between the laser and the upper computer, and you can set
emission parameters and get information from the laser.
Wiring in RS-232 Mode
Figure 11
Wiring Diagram in RS-232 Mode
There are three working modes in RS-232Mode: CW mode, modulation mode
and preset mode.
Six groups of laser power can be set in CW mode.
Six groups of parameters including laser power, frequency and duty cycle
can be set in modulation mode.
Six groups of parameters divided into 16 segments including laser power
