Wuxi Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus RFL-A6000D~A12000D
5
2.5 Attentions
a) Make sure the product is properly grounded before use.
b) Make sure that the correct voltage of 380VAC is used. Power supply connection failures will
cause irreversible damages the device.
c) It is important to keep the collimating lens clean, otherwise it will cause irreversible damages the
device.
d) When not using the laser, please cover the fiber delivery cable connector protection cap, do not
touch the lens of the output, when necessary, use special dust-free cotton swabs and alcohol to
clean the lens.
e) Please keep the protective cap of fiber delivery cable connector properly when using the laser. To
avoid dust, make sure to place the protective cap with the opening facing downward.
f) High temperature in summer may cause condensation to form inside the laser, which may cause
permanent damage to the laser, please ensure that the laser is shut down with the water cooler
being stopped at the same time.
g) low temperatures during the winter can cause the laser's internal cooling water to freeze easily,
causing permanent damage to the laser, please ensure that when the laser is in the shutdown state,
the water cooler continuous operation.
h) Failure to follow the instructions may cause laser power loss, and such loss is not covered by
warranty.
2.6 Specifications
Table 2 Product Specifications
Optical properties
Test Conditions
Model
A6000D
A8000D
A10000D
A12000D
Output power(kW)
6
8
10
12
Ambient Temp: 25
℃
Operation Mode
CW/Modulated
/
Polarization State
Random
/
Output Power
Tunability (%)
10
～
100
/
Emission
Wavelength(nm)
915±10
Nominal Output Power
