Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C30000XZ
66
8.3.6 Laser output parameters read the setting area
Laser output parameter setting interface is shown in Figure 45. The output parameter setting is not
valid when AD mode is on.
Figure 45 Laser output parameter setting area display interface
8.4 Laser parameter display area
The display interface for laser parameter display area is shown in Figure 46. The module status is
used to shield the faulty module, the green light indicates the number of modules installed inside the
current laser, and the check box indicates the module that is running in the current laser.
Figure 46 Laser parameter display area display interface.
8.5 Alarm type display area
The laser alarm type display area interface is shown in Figure 47. This interface shows the cause of
the alarm for the current laser.
