Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C30000XZ
59
Figure 35 Multi-laser control area interface.
Select IP address of corresponding laser, and then double click. PC software will take
communication with selected laser. After the communication established, the lower left status display
shows that the network connection is ok, shown in Figure 36.
Figure 36 communication status interface between PC software and laser
8.2.1 Add/delete laser
You can add/delete laser in the laser list area by right-click to add/delete In the PC software. You
need to type the IP address of laser to add a new laser. Detailed operation is shown in Figure 37.
