Rayco C275, Operator, Service, Maintenance Manual

Page: 27 / 94

C275 Operation & Service Manual
800.392.2686
27
• E-Stop Button is pulled out.
Once the engine is running, if any of these interlocks are
disengaged, the engine will remain running; however, all
machine movement will be interrupted.
13.
14. STOP ENGINE
The STOP ENGINE warning light indicate that a major
fault has occurred and that the engine must be shut down
immediately! The operator must check for any active faults
that have been detective on the Main Display Panel in the
Fault Indicator screen. Consult your RAYCO Dealer or
Service Technician for further instruction.
15. CHECK ENGINE
The CHECK ENGINE warning light tells the operator if
there are any electrical faults within the system. Active
and inactive faults can be viewed on the Main Display
Panel in the Faults Indicator screen. When the key first
energizes the system, it will perform a self test for a few
seconds and the light will turn off telling the operator that
it is safe to start the engine. If the light remains illuminated,
the operator must check for any active faults that have
been detective. Consult your RAYCO Dealer or Service
Technician for further instruction.
16. WAIT TO START- (Intake Heater)
The WAIT TO START warning lamps indicates that the
intake air heater is activated. The air heater is automatically
activated by the engine controller. Do not attempt to start
the engine when this light is illuminated. When the light
turns off, you may turn the key switch to the start position
and start the engine.
17. Attachment Engagement
The attachment engagement lever starts the attachment
and allows the attachment to begin rotating. When
engaging the attachment, with the engine at an idle increase
the lever (17) until it stops in the forward position. Then
increase the engine to full throttle.
Heating/Cooling System
The cab is designed with a Fresh Air / Heater / Air
Conditioner system. It is used to pressurize and help
keep dust out of the cab.
• Fan speed control (1).
• Air mixture control (2).
Note: If the A/C is switched off, the coolest setting will be
the outside ambient air temperature.
• Air Conditioning button (3).
Note: the fan will continue to operate if the engine is
off but the key switch is in the “on position” - the air
conditioning will not operate unless the engine is running.
It is generally ineffective to use the air conditioning in
temperatures below 50
o
F (10
o
C)
• Fresh air can be brought into the cab or recirculated
using the mode switch (4).
Note: to maximize heating or cooling in extreme conditions,
use the recirculate mode. Because this mode recirculates the
air inside the cab, it is also useful when working in excessively
dusty conditions.
Operation
1
3
4 2