INSTALLATION INSTRUCTION & OPERATION MANUAL
PowerPlus System 100-3-1U
www.raycap.com
© Raycap | All rights reserved.
•
(
320-1398) QRC | Rev.A
Page 21 of 34
10. Single Mode Settings
10.1
Initial Settings Menu:
Single Mode
System Units Selection
•
In
Single Mode
selection the next step is the
System Units
selection. There are two types of system
units “
Imperial
” and “
Metric
”. The selection is applied by the pressing the ‘
ENTER’
button of the
primary module.
•
The secondary modules in this stage are displaying “
SETTINGS
” message because they are waiting
for their unique settings due to independent operation. The buttons for each secondary module is
enabled in order to input its new settings.
Up/Down
Slot 1
Primary
Slot 2
Slot 3
10.2
Initial Settings Menu:
Single Mode
System Units Selection
Cable Cross Section Selection
•
The next step is the
Cable Cross Section
selection. There are many standard cross section types
depending on system units selection (mm
2
, AWG). The cross section types are changed by pressing
the ‘
UP
’ or ‘
DOWN’
buttons of the primary module. The selection is applied by pressing the ‘
ENTER
’
button of the primary module.
Up/Down
Up/Down
Slot 1
Primary Imperial
Slot 1
Primary Metric
Slot 2
Slot 3
