PowerPlus System 100-3-1U
INSTALLATION INSTRUCTION & OPERATION MANUAL
www.raycap.com
(
320-1398) QRC | Rev.A
•
© Raycap | All rights reserved.
Page 18 of 34
8.3
Initial Settings Menu: Mode Selection
•
The next step is the
Mode
selection. The mode is changed by pressing the ‘
UP
’ or ‘
DOWN
’ buttons of
the Primary module. The selection is applied by pressing the ‘
ENTER
’ button of the Primary module.
•
The buttons of the secondary modules (Slot 2, Slot 3) are disabled in this stage. The secondary
modules also are displaying the “
SETTINGS
” message.
9.
Parallel Mode Settings
9.1
Initial Settings Menu:
Parallel Mode
System Units Selection
•
In
Parallel Mode
selection the next step is the
System Units
selection. There are two types of
system units “Imperial” and “Metric”. The system units are changed by pressing the ‘
UP
’ or ‘
DOWN
’
buttons of the primary module. The selection is applied by pressing the ‘
ENTER
’ button of the primary
module.
•
The secondary modules (Slot 2, Slot 3) in this stage will display “
SETTINGS OK
” since they are
waiting for common settings from the primary module.
Up/Down
Slot 1
Primary
Slot 2
Slot 3
Up/Down
Slot 1
Primary
Slot 2
Slot 3
