It is recommended that each burner is serviced
individually so as not to get the components from the two
burners mixed up.
1.
Clean heads with soft brush and inspect for damage or
wear.
1.
Clean between the blades of the fan impeller with a
small brush and tip upside down to remove any
residue.
2.
Spin the motor to make sure that it turns easily.
INTRODUCTION
BURNER HEAD CLEANING
FAN CLEANING
Burner Servicing
7
Summary of Contents for Heatranger 480GB
