10
GENERAL OPERATION INSTRUCTIONS
To begin using the monolight, do the following:
NOTE:
Ensure the power switch is set to OFF before
connecting the monolight’s power cord.
1. Plug the cord into the AC wall outlet, then plug
the connector into the AC input on the flash unit.
2. Power on the monolight by flipping the power
switch located on the back of the unit.
3. Turn on the modeling light using the modeling
light button. For more information about how to
operate the modeling light, refer to the Setting
the Modeling Light Power Output section on
page 24.
4. Connect your camera to the monolight to begin
triggering.
CONNECTING YOUR CAMERA TO THE MONOLIGHT
The Raya SDR-400 Alpha Monolight has two
triggering options out of the box – wireless and
sync cord connections. Please reference the
following instructions to connect your camera to the
monolight.
