23
5. Once it is
unhooked, grip
the base of the
flash tube on each
side and carefully
pull it from the
monolight.
6. Pick up the new flashtube and push its pins into
the sockets using firm, even pressure at the base.
7. With needle-nose pliers, hook the retention
spring over and above the flash tube.
8. Reinsert the modeling lamp, then any other
accessory to the monolight.
Replacing the Fuse
The Raya SDR-400 comes with two fuses: one
installed and one spare. Both are located within the
fuse bay. To remove the fuse housing from the fuse
bay and replace the fuse, do the following:
1. Ensure the monolight is powered off and
unplugged.
