11
GB
PHONE HOLDER WITH WIRELESS CHARGING
Introduction
To get the most out of your new phone
holder with wireless charging, please read
through these instructions before use. Please
also save the instructions in case you need to
refer to them at a later date.
Technical data
Power for wireless charging:
5/10 W
Frequency:
110-205 kHz
RF power, transferred:
20 dBμA/m
Input:
5 V 2 A/9 V 1.67 A
Output:
5 V 1 A/9 V 1.2 A
Operating temperature:
-10°C - +40 °C
Suitable for mobile phones with a width of
65-85 mm and a thickness of max. 11 mm
that support wireless charging (Qi)
With protection against excessive current/
voltage
Note! May only be used in vehicles with a 12
V battery.
Parts included
1. Bracket for ventilation grille
2. Bracket with suction cup
3. Phone holder
4. Cord
See fi gure 1 at the front of these instructions.
Fitting
Fitting to ventilation grille
Loosen the collar on the back of the phone
holder (3) and insert the ball on the bracket
(1) into the socket. Tighten the collar so that
the bracket is secure.
Securely insert the bracket into a ventilation
grille in the car. See fi gure 2. Make sure that
the ventilation grille can support the weight
of the phone holder and mobile phone.
Fitting with suction cup
Loosen the collar on the back of the phone
holder (3) and insert the ball on the bracket
(2) into the socket. Tighten the collar so that
the bracket is secure. See fi gure 3.
Press the suction cup against the surface
to which you want to attach it. Secure the
suction cup against the surface using the
clamp arm. See fi gures 4 and 5.
Make sure that the phone holder is
positioned so that it does not impair the view
from the car.
Use
Connect the phone holder (3) to a 12 V
adapter with a USB connector or directly
into a USB connector using the cable (4). See
fi gure 6.
Place your mobile phone in the holder so
that it grips around the mobile phone. See
fi gure 7.
The mobile phone is wirelessly charged
automatically.
Please note that phone covers, etc. may
aff ect the wireless charging.
