6. Licate the 6 USB cables (3 left and 3 rig/ht) in the fiir spacer, and riut theo ti the backd if the
oain cabinet asseobly.
7. Push the twi oain cabinet sectins tig/ether.
8. Using/ twi #1/4-20 x 2” blackd security screws, twi 1/4” lickd washers, and twi 5/8” fat washers,
insert the bilts thriug/h the hiles in the blackd cinnectir brackdet and inti the iutside if the
fiir spacer base and secure it. Repeat this step in the ippisite side if the fiir spacer base.
Pag/e 9
Hali: Fireteao Raven Gaoe Siftware cipyrig/ht 2018 PlayMechanix™ Inc. All rig/hts reserved.
Important! If you intend to connect card readers to the game and will be using
Ethernet cable (cat5), you will need to run the cables from the control pod through
the floor spacer! Do not attempt afer the cabinet is fully assembled!
