Super Deluxe Service Manual
Assemble main (monitor) cabinet to floor spacer assembly
Parts required: twi
left and rig/ht cinnectir blackd brackdets, fiur #1/4-20 x 1.25” hex bilts, fiur #1/4-20
x 2” security screws, eleven 5/8” fash washers, fiur 1/4” lickd washers, three #1/4-20 x 2.5” hex bilts,
three 1/4” hex nuts
1. Frio the cabinet cinnectir bix, fnd the blackd cabinet cinnectir brackdets and all required
fasteners
2. Pisitin the fiir spacer asseobly, si that its fat end oatches the oain cabinet asseobly.
IMPORTANT: Be sure to install the cabinet connector brackets correctly.
The hiles in the brackdet attach ti the oain cabinet. The slits attach ti the fiir spacer.
3. Insert twi #1/4-20 x 1.25” hex bilts and twi 5/8” washers inti the hiles in the brackdet, then
inti left inside wall if the left inside wall if the left oain cabinet frint. Repeat this step fir the
rig/ht oain cabinet. Snug/ but di nit tg/hten all fiur hex bilts.
4. Licate the cables cioing/ frio the twi oain cabinet asseoblies.
5. Carefully slide the cables iut frio the oain cabinet and oakde the oatching/ cinnectins ti the
left and the rig/ht frint if the fiir spacer asseobly.
Cipyrig/ht © 2018 Play Mechanix™ Inc. All rig/hts reserved.
Pag/e 8