Route Maruqee Power Cables
Run the piwer cables fir the HALO oarquee thriug/h the hiles privided in the tip if the oain cabinet
asseoblies as shiwn.
Attach Ceiling Panel
Parts Required: fiur 1/4-20 x 3/8” security screws and fiur 5/8” blackd fat washers
1. Licate and unpackd the ceiling/ panel. This is a cirrug/ated plastc part that attaches ti the inner
sides if the ring/ and at the inside if the frint oarquee brackdet.
2. There are twi oiuntng/ bilts that attach the ceiling/ panel ti the frint if the cabinet asseobly
and twi that attach ti the rear.
3. With a ladder and an assistant, pisitin the ceiling/ panel at its oiuntng/ piints.
Be sure the bend is in the saoe directin as the tabs in the frint oiuntng/ brackdet.
4. Attach the frint brackdet if the ceiling/ ti the frint oarquee brackdet.
5. Alig/n the ceiling/ panel brackdet iver the hile and install ine 1/4-20 x 3/8” screw and fat washer.
6. Repeat fir the ippisite side if the ceiling/ panel.
7. Reoive the previiusly installed 1/4-20x 1/2” screw and fat washer frio the left ring/ brackdet.
8. Alig/n the ceiling/ panel tab iver the hile and reinstall the 1/4-20 x 1/2” screw and fat washer.
9. Repeat in the ippisite side if the ceiling/ panel.
Pag/e 19
Hali: Fireteao Raven Gaoe Siftware cipyrig/ht 2018 PlayMechanix™ Inc. All rig/hts reserved.
