11
4>
Type the default User Name as admin and leave the User Password as blank.
Click on the “Log In” button to access the Web Management Interface.
5>
If you choose to click on the “My Storage” button, enter the admin login
name and password to gain access to the Wi-Fi SD/USB. Once successfully
logged-in, it automatically mounts the storage area of the Wi-Fi SD/USB
onto your desktop
3.6.1.2
Wi-Fi SD/USB Configuration using PC
Once your Wi-Fi enabled-PC is successfully connect to the Wi-Fi SD/USB,
using the “NAS Client Login Utility V2.2” will allow you to access our built-in
Web Management Interface and configure your device.
1>
During the initial setup, our Wizard will automatically run and will guide you
through the step-by-step process on configuring the Wi-Fi SD/USB as seen
on the screenshot below. You may cancel this process by clicking on the “X”
at the top right corner of the window. If you cancel the Wizard, it will keep
the factory default settings of your Wi-Fi SD/USB.
2>
Click on the “Next” button. By default, the Access Point (AP)+Client is
selected.