40
Note:
1. Different URL strings must be separated with a comma. To match all websites,
use * (asterisk).
2. Up to 10 filter rules can be configured.
3. If you have not set up the system time for this device, click System Tools ->
Time Settings to set up correct time and date so to bring the rules into effect.
4.7.2
Client Filter
This section is to set the client filter access. Check the checkbox to enable this
function. Select a policy from the drop-down menu and enter a policy name in
the field.
You can set the access restriction parameters (e.g. a fixed IP range, times, and
days) and set the client filter by following the steps below.
1.
Power on the router and enter the router gateway 10.10.10.252 (password:
admin) in the browser to log onto the router’s web page.
2.
On the menu column, click Network Settings and then WAN Settings. Select
Dynamic IP (or the Connection type of your setting) and click “Save”.