46
Note:
1.
For better security, configure a port number (from1025 to 65535) as remote
web management interface. Do not use the number of any common service
port (1-1024).
2.
Make sure your WAN IP address (Internet IP address) is a public IP address.
Private IP addresses are not routed on the internet.
3.
It is unsafe to make your router remotely accessible from all PCs on external
network. For better security, we suggest that only enter the IP address of the
PC for remote management.
4.7.5
WAN Ping
The ping test is to check the status of your internet connection. When the test is
disabled, the system will prevent the ping test from a WAN.
Set Steps:
①
Select the Expert Setting
②
Select the WAN Ping
③
Select the Enable
Before you enable WAN Ping, go to your start menu and run “CMD” first. Then
type “ping 10.10.10.2” to test your internet status. After WAN Ping is enabled,
entering ping 10.10.10.2 won’t show any status information.