49
Set Steps
:
1.
Enable Traffic Control
: Tick the Enable box to enable Traffic Control.
2.
IP Range:
Enter the latter number of the IP address, i.e. enter 101 in both boxes.
3.
Up:
Set a limit to regulate the upload bandwidth of PCs on the LAN.
4.
Down:
Set a limit to regulate the download bandwidth of PCs on the LAN.
5.
Apply:
Tick to enable the current rules.
6.
Add:
Click to add current rules to the rule list.
7.
Click
Save
to save your settings.
Note
:
1. 1M=128KByte/s.
2. The volume of uplink traffic/downlink traffic should not be larger than that
allowed on your router's WAN (Internet) port. You can inquire with ISP to
provide the volume of Internet traffic.
3. The bandwidth for ADSL/DSL line usually ref
ers to the download bandwidth
4.10
USB Setting
4.10.1
USB Capacity
Click USB Capacity to configure the USB device connected to the router.
Click
Scan, wait a minute until the
USB device connected to the router appear.
4.10.2
USB Service
Click USB Service to configure USB server. Enable the servers to share information
on the USB device for other users on this local area network to access its data
(including music, video, and photo).