54Mbps Wireless Access Point User Manual
20
•
Wireless Bridge
. Provides wireless connectivity between
two or more wired segment. When operating as Wireless
Bridge, the device does not accept association request
from wireless stations. All bridging devices must use the
same channel in order to communicate with each other.
Figure 4-5 Wireless Bridge Mode
Bridge Restrict
: Select whether to enable or disable this function.
When set to enabled, all devices operating in Wireless Bridge
mode must have others’ Wireless Interface MAC addresses in their
respective
Remote Bridges
table in order to establish the
connection with each other (more secure). When set to disabled,
only one device is required to have the
Remote Bridges
table
filled with the Wireless Interface MAC address of other device in
order to establish the connection.
Remote Bridges
: Enter the Wireless Interface’s MAC address of
the remote Wireless Broadband Router in this field. The remote
device should also enter this Access Point’s MAC address in its
Remote Bridges
table if the
Bridge Restrict
is enabled. To find
the MAC address of this device, see
Wireless Interface
, in the
beginning of this section.
