3. Setting Up Ethernet / WLAN Client
13
3.3 Checking Connection with the Access
Point
You can use the PING command to verify whether or not the
Ethernet/Wireless client can communicate with the device.
1. Open the DOS command window.
•
For Windows 98/Me:
Start
>
Run
. Type
command
and
click
OK
.
•
For Windows 2000/XP:
Start
>
Run
.
Type
cmd
and
click
OK
.
2. Type the ping command and enter the IP address of the
Wireless Broadband Router. The factory default value is:
192.168.1.1. If you have changed the IP of the device, then
type the new IP address of the Wireless Broadband Router.
For example:
C:\ping 192.168.1.1