54Mbps Wireless Access Point User Manual
28
Figure 4-8 Upgrading
After upgrading, the new firmware version number is displayed in
Current Firmware version
field.
Restore Factory Defaults
All settings set by the administrator will be erased. This option
restore all the settings back to factory defaults. To perform this
operation, click the
Restore
button and then wait for a few seconds.
You will return to the Administration page when the process is
complete. This feature is basically the same as resetting via the
reset button (see “Rear Panel and Connector”) on the device but it
allows you to remotely perform the reset task.
System
Reboot
: Reboot the Wireless Broadband Router. This feature is
basically the same as resetting via the reset button (see “Rear
Panel and Connector”) on the device but it allows you to remotely
perform the reset task.
