background image

Company Confidential

 

50

 

Raveon Technologies Corp. 

 

Limited One Year Warranty 

If within 12 months from date of purchase, this Product fails conforms to Raveon Technologies 
Corporation’s (the Company) published specifications for the model purchased due to a defect in 
material or workmanship, Raveon Technologies Corporation will repair or replace it, at Raveon’s 
sole discretion. This warranty is extended to the original purchasing end user only and is not 
transferable. Any claim for breach of warranty must be brought to the 

Company’s attention within 

such twelve (12) month period and the Product must be returned for action on any such claim 
within twelve (12) months from the date of purchase Within a reasonable period of time after a 
claim, the Company will correct any failure of the Product to conform to specifications or any 
defect in materials or workmanship, or replace the Product, or at its option provide a full refund of 
the purchase price. A repaired or replaced Product is warranted for 90 days from the date of 
return shipment to the buyer, or for the balance of the original warranty period, whichever is 
longer. These remedies are 

the buyer’s exclusive remedies for breach of warranty. 

This warranty does not apply to: (a) product damage caused by accident, dropping or abuse in 
handling, acts of God or any negligent use; (b) units which have been subject to unauthorized 
repair, opened, taken apart or otherwise modified; (c) units not used in accordance with 
instructions; (d) damages exceeding the cost of the product; (e) batteries; (f) the finish on any 
portion of the product, such as surface and/or weathering, as this is considered normal wear and 
tear; (g) transit damage, initial installation costs, removal costs, or reinstallation costs; (h) damage 
due to lighting, floods, fire, or earthquakes (i) any product, components or parts not manufactured 
by the Company (j) defects caused by failure to provide a suitable installation environment for the 
Radio; (k) damage during shipment; (l) that the Product will be free from any claim for 
infringement of any patent, trademark, copyright or other proprietary right, including trade secrets.  

RAVEON TECHNOLOGIES INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL OR 
CONSEQUENTIAL DAMAGES ARISING DIRECTLY OR INDIRECTLY OUT OF THE 
OWNERSHIP, USE OR OPERATION OF THE RADIO REGARDLESS OF WHETHER SUCH 
DAMAGES ARE PREDICATED OR BASED UPON BREACH OF WARRANTY, BREACH OF 
CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL THEORY.  SUCH 
DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF SAVINGS 
OR REVENUE, LOSS OF USE OF THE RADIO OR ANY ASSOCIATED EQUIPMENT, COST 
OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT, FACILITIES OR SERVICES, THE 
CLAIMS OF THIRD PARTIES, INCLUDING CUSTOMERS AND INJURY TO PROPERTY

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR 
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT 
APPLY TO YOU. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED 
WARRANTIES. ALL IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF 
MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, 
ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED IN THIS LIMITED WARRANTY, 
AND SHALL BE OF THE SAME DURATION AS THE WARRANTY PERIOD STATED ABOVE. 
SOME STATES DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED 
WARRANTY, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. 
 
This warranty gives you specific legal rights and you may also have other rights which vary from 
state to state.  

No employee of the Company, or any other party is authorized to make any warranty in addition 
to those made in this document.  This warranty 

limits the Company’s risk and allocates the risks 

of product failure between the Company and the buyer. This allocation is recognized by both 
parties and is reflected in the price of the goods. The buyer acknowledges that it has read this 
warranty, understands it, and is bound by its terms. This limited warranty is governed by the laws 
of the State of California, without reference to its conflict of law provisions or the U.N. Convention 
on Contracts for the International Sale of Goods. 

 

Summary of Contents for RV-M8R




















































Reviews: