M7 GX Technical Manual
39
Raveon Technologies Corp.
8.1.
GPS Operation Mode Configuration
The
GPS x
command is provided to make configuring the M6G simple to setup for
common configurations. The following table summarizes the various standard
configurations. Choose the configuration that is most similar to your usage, and
execute the appropriate
GPS x
command.
See
Section 3
for a complete list of the various GPS modes.
To review the overall configuration of the GPS features of the M6G radio, type
GX
when in the command mode. A listing of the GPS features will be displayed. An
example listing of a
M6G
in GPS mode 2 is shown below:
-GX GPS mode : 2 RavTrack PC
Serial Protocol : Raveon $PRAVE
Serial port baud rate: 38400 N 1
Position TX Interval : 60seconds (will TX when still.)
Proximity Alert : OFF
External Triggers : OFF
Speed limit trigger : 0 (OFF)
TX method : 1 (Time Slot)
mS per TDMA slot : 200 4 X 50mS ticks
TDMA slot number : 4
TDMA frame time : 2
Waypoint Prefix : V
Security key is enabled.
OK
After the
GPS x
command is executed, the operation of the unit may be
customized for special applications. The following table summarizes the
parameters that may be modified,
AFTER
the
GPS x
command.
