background image

Page 2 

power 

I. 

Operating the Raven XP 

 

1. Introduction to the Raven XP  

 

The Raven XP is a complete Windows tablet computer with 

a high brightness 8.4” diagonal touch screen that runs the 

Windows “XP Embedded” operating system. The Raven is 

uniquely configured with a solid-state “flash” hard disk 

drive. The use of a solid state hard disk drive makes the 

Raven much more rugged than most tablet computers due to 

the complete lack of delicate moving components in the hard 

disk drive system. Because of the solid-state disk drive 

technology, the Raven may be operated at high altitudes 

(above 10,000 feet), unlike mechanical hard disk drives.  The 

Raven XP is also much more immune to shock and vibration than traditional tablet computers. 

Windows XP Embedded is a special “lean build” of the popular Windows XP operating system 

that is specifically optimized for running without standard hard disk drives.  Windows XP 

Embedded will run virtually all software that is designed to run on a standard Windows XP 

computer. 

 

2. Basic Use 

 

Starting up / shutting down 

To start the Raven XP, press and release the power button 

located along the left edge of the unit.  Within a few seconds you will 

see the screen illuminate and you should see the familiar Windows XP 

boot up screen. Once the booting process completes, you will hear the 

windows music theme on the speakers, and you should see a Windows 

Desktop. 

 

Please read the instructions in this manual before starting the AnywhereXP software. 

If you do 

not, the system may not start properly. 

 

To shut down the Raven XP, tap START, then SHUT DOWN, just as with any other computer.  

We recommend actually shutting down the unit, not placing it into standby.  By completely 

shutting down the unit between uses, system reliability will be enhanced as all running software 

will be purged from the system at the reboot. 

As with all our products, we recommend that you 

restart the computer shortly before each flight. 

 

Using the touch screen 

The Raven XP has a real touch screen which means you do not 

have to use a special stylus to operate the software. A stylus is 

provided and is housed in the upper right edge of the unit. 

 

To click on something, simply tap once on the screen and you will 

see it highlighted.  Tap twice in rapid succession is the same as a “double click” with a mouse on 

Summary of Contents for XP









Reviews: