Raven SmarTrax John Deere 8X60 Series, Installation Manual

Page: 24 / 48

Chapter 3
20 John Deere 8X60/8X70 Series SmarTrax™ Installation Manual
14.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-746) in the open port of the steering valve.
15.
Connect the straight end of the installed hydraulic hose to the fitting installed in Port B2 of the flow switch.
Install the Pressure Hose
FIGURE 17.
Pressure Hose on Steering Valve
1.
Disconnect the machine’s pressure hose from the steering valve.
FIGURE 18.
Pressure Hose Installed on Steering Valve
2.
Install a -10 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-031) in the open pressure port.
3.
Connect the machine’s pressure hose to the opposite end of the installed tee fitting.
4.
Install the -10 ORFS end of the supplied hydraulic hose (P/N 214-1000-755) on the opposite end of the
installed tee fitting.
5.
Connect the -8 ORFS end of the installed hydraulic hose to the fitting installed in Port P of the SmarTrax
valve (P/N 334-0003-089).