Trimble 372 Configuration using AgRemote:
97
TRIMBLE 372 CONFIGURATION USING AGREMOTE
FIGURE 5. Port A NEMA1 Configuration
10. Press Enter to save the settings.
11. Press the Down button until “NEMA2” displays.
12. Verify that VTG and ZDA are capitalized so they are turned on.
FIGURE 6. NEMA 2 Configuration
13. Press the Down button to continue configuring Port A.
14. Press the Down button until “CFG: Port A Out RTS_CTS” displays.
15. Verify “CFG: Port A Out RTS_CTS” is off.
FIGURE 7. Port A RTS/CTS Configuration
16. Press Enter to save the settings.
17. Press the Down button to continue configuring Port A.
18. Press Enter to save the settings.
19. Press the Down button until “NMEA” out displays.
