CALIBRATION | SBGUIDANCE | SMARTRAX MD
PAGINA 40/48 | Installation manual | 016-8000-098EN | Rev. A
Raven Industries Inc.
8.6
STEER SENSOR
In the tab Steer Sensor the disengage value can be
calibrated. This can be done automatically bij pressing
the Start button (Figure 45).
Warning!:
Steering wheel and wheels will be turning in the
next steps!
The steering wheel will be turned to the left and to the
right. After that, the system calculates a typical
Disengage sensitivity. This one can be highered or
lowered in case the disengaging value is not at the
right point.
Press Save after the calibration is done or after the
disengage sensitivity is changed.
FIGURE 45 CALIBRATING DISENGAGE SENSOR
