background image

Raven Applied Technology products that have been registered online are covered 

for an additional 12 months beyond the Limited Warranty for a total coverage period 

of 24 months from the date of retail sale. In no case will the Extended Warranty 

period exceed 36 months from the date the product was issued by Raven Industries 

Applied Technology Division. This Extended Warranty coverage applies only to the 

original owner and is non-transferable.

How Long is the Extended Warranty Coverage Period?

To register, go online to www.ravenhelp.com and select Product Registration.

Where Can I Register My Product for the Extended Warranty?

Yes. Products/systems must be registered within 30 days of retail sale to receive 

coverage under the Extended Warranty. If the component does not have a serial 

tag, the kit it came in must be registered instead.

Do I Need to Register My Product to Qualify for the 

Extended Warranty?

This warranty covers all defects in workmanship or materials in your Raven Applied 

Technology Division product under normal use, maintenance, and service when 

used for intended purpose.

What Does this Warranty Cover?

Bring the defective part and proof of purchase to your Raven dealer. If the dealer 

approves the warranty claim, the dealer will process the claim and send it to Raven 

Industries for final approval. The freight cost to Raven Industries will be the 

customer’s responsibility. The Return Materials Authorization (RMA) number must 

appear on the box and all documentation (including proof of purchase) must be 

included inside the box to be sent to Raven Industries. In addition, the words 

“Extended Warranty” must appear on the box and all documentation if the failure is 

between 12 and 24 months from the retail sale.

How Can I Get Service?

Upon confirmation of the product’s registration for the Extended Warranty and the 

claim itself, Raven Industries will (at our discretion) repair or replace the defective 

product and pay for the standard return freight, regardless of the inbound shipping 

method. Expedited freight is available at the customer’s expense.

What Will Raven Industries Do?

Raven Industries will not assume any expense or liability for repairs made outside 

our facilities without written consent. Raven Industries is not responsible for 

damage to any associated equipment or products and will not be liable for loss of 

profit, labor, or other damages. Cables, hoses, software enhancements, and 

remanufactured items are not covered by this Extended Warranty. The obligation of 

this warranty is in lieu of all other warranties, expressed or implied, and no person 

or organization is authorized to assume any liability for Raven Industries. 

Damages caused by normal wear and tear, misuse, abuse, neglect, accident, 

or improper installation and maintenance are not covered by this warranty.

What is Not Covered by the Extended Warranty?

Extended Warranty

016-0171-536 Rev. A, E19889

Summary of Contents for RS1

















































Reviews: