Manual No. 016-0171-598 Rev. B
5
Initial Hawkeye Configuration
1. Press the VT Menu button.
2. Walk through all of the steps in the setup wizard. For this you will need the
following information:
Note: If, at any point during the setup wizard you have a question, press the
??? button by the item for more information.
3. Press the tools button.
Number of Nozzle Control Valves
Applicator Type
Nozzle Spacing
Tip Size
Fence Rows (if needed)
Number of Sections
Section Widths
Boom Offset
Switch Mapping (if needed)
Boom Pressure Calibration
Valve Calibration
Flow Meter Calibration
Target Rate
Target Pressure
