PAGE 21/30 |
Installation manual
|
016-5035-065EN
|
Rev. A1
SAFETY HOMOLOGATION KIT INSTALLATION | RAVEN EUROPE KIT INSTALLATION MTZ - BELARUS
2
SAFETY HOMOLOGATION KIT
INSTALLATION
To comply with the rules of homologation on the
European continent installation kits and software have
been developed.
The Raven RS1/SC1 system is an approved steering
system per the requirements of 2009/66/EC, § 38
StVZO (EU) 2015/208 IV and V incl. all amendments up
to (EU) 2015/208. By GTÜ No. GTÜ 2015/208/ V-
19002.00.
For using homologation terms, the appropriate kit
must be used.
Part
Description
115-8000-157
HRNS HDU TO MASTER ENGAGE SEAT
115-8000-428
CBL, OPS, W/ HDU, GENERIC
115-8000-411
CABLE 6P TO DT MASTER SWITCH
063-8000-149
MASTER SWITCH AUTO PILOT
013-9000-003
TECH REPORT RS1/SC1 2009/66EC
Connect the 8-pin connector of HARNESS, HDU TO
MASTER ENGAGE SWITCH (115-8000-157) to CABLE,
CHASSIS, HYDRAULICS, HDU (115-8000-377) (Figure
28).
On the 115-8000-157 cable three connectors are
available:
•
Engage - push button or foot switch.
•
Master switch – Switch on/off high current
power to the valve.
•
Seat switch – Detects if the driver is on the seat
or not.
FIGURE 28 CONNECTED 115-8000-157 TO THE 115-8000-
377
TABLE 3. KIT, SAFETY HOMOLOGATION, CRX, GENERIC.
