PAGE 19/30 |
Installation manual
|
016-5035-065EN
|
Rev. A1
STEERING SYSTEM INSTALLATION | RAVEN EUROPE KIT INSTALLATION MTZ - BELARUS
Plate for WAS mounting:
Pre-prepare the generic flat bracket plate 107-8000-
066 with holes for installing the WAS with part number
063-8000-168 on the tractor axle. The plate will be
different on 2 types of the axle (Figure 21, Figure 22).
Plate for mounting the wheel angle sensor is installing:
•
on front cylinder axle - from the back side of
the axle on a holes, showed on Figure 23.
•
on back cylinder axle - on the top of the axle
on the holes of the cover for adjusting the
track gauge showed on Figure 24.
FIGURE 21 WAS MOUNTED ON FRONT CYLINDER AXLE
FIGURE 22 WAS MOUNTED ON BACK CYLINDER AXLE
FIGURE 23 PLACE FOR PLATE INSTALLATION-FRONT
CYLINDER AXLE
FIGURE 24 PLACE FOR PLATE INSTALLATION- BACK
CYLINDER AXLE
