PAGE 17/30 |
Installation manual
|
016-5035-065EN
|
Rev. A1
STEERING SYSTEM INSTALLATION | RAVEN EUROPE KIT INSTALLATION MTZ - BELARUS
Connect the DIN connectors marked "Left" and “Right”
to the proportional valve. Connect the DIN connector
marked "Lock" to the shut-off valve (Figure 16).
Connect the 4-pin Phoenix M12 connector to the
pressure sensor of the manifold (Figure 17).
Please note!:
The torque of the pressure sensor in the
manifold V3 is 30 Nm. It is not necessary to
check this at delivery of an assembled
manifold. However, make sure, when replacing
the pressure sensor, that it is tightened with
the correct torque.
FIGURE 16 DIN CONNECTOR CONNECTION
FIGURE 17 CONNECTION TO THE PRESSURE SENSOR
