Raven Case IH SmartTrax SPX 3230, Installation Manual

Page: 25 / 36

4
Manual No. 016-5032-081 Rev. A 21
Cab Component Installation
FIGURE 8.
DGPS OUT Connected to Console Receiver Connection
6.
Connect the DGPS OUT connector to the Viper Pro or Envizio Pro receiver connection.
Install the Valve Harness
FIGURE 9.
Valve Cable Routed Through Access Point
1.
Route the valve cable through the right-rear corner cable access grommet under the window.
2.
Connect the rectangular 12-pin connector on the valve harness (P/N 115-4001-111) into the mating
connection on the node harness (P/N 115-4001-110).
Console
Cable
Console Receiver
Connection
DGPS Out
(Node Cable
Connection)