Raven Case IH SmartTrax SPX 3230, Installation Manual

Page: 18 / 36

Chapter 3
14 Case IH SPX 3230, 3320, and 3330 SmarTrax™ Installation Manual
5.
Install the -8 end of the supplied hydraulic hose (P/N 214-1000-630) on the 90° end of the installed tee
fitting.
6.
Connect the other end of the installed hydraulic hose to Port T of the SmarTrax valve.
Install the Left and Right Steering Hoses
1.
Locate and disconnect the machine’s left steering hose from the left steering cylinder.
Note:
The left steering hose is connected to the fitting located closest to the center of the machine.
2.
Route and connect the left steering hose to the Port A2 of the installed flow switch (P/N 334-0003-085).
FIGURE 8.
Installed Left Steering Hose
3.
Install a -6 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-069) on the open steering cylinder
port.
4.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-672) on the opposite end of the
installed tee fitting.
5.
Connect the other end of the installed hydraulic hose to the fitting installed in Port B3 of the installed flow
switch.
6.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-671) on the 90° end of the installed tee
fitting.
7.
Connect the straight end of the installed hydraulic hose to Port A of the SmarTrax valve.