4
P/N 016-0230-047 Rev. C
23
ULTRASONIC SENSOR INSTALLATION
3. Mount the right boom sensor assembly on the front of the right outer boom section using two 2-1/16” W x 3” L
x 3/8” thread U-bolts (P/N 107-0171-609) and four 3/8”-16 zinc flanged lock nuts (P/N 312-1001-164).
NOTE:
Ensure that the sensor does not contact the inner boom section when the boom is folded in toward
the cab.
FIGURE 4. Left Inner Boom Sensor Installed
4. If optional inner boom sensors are being installed, repeat the steps above to mount the inner boom sensors to
the front of the boom.
MOUNT THE CENTER SENSOR
FIGURE 5. Center Sensor Installed
1. Install the center ultrasonic sensor (P/N 063-0130-018) on the remaining ultrasonic sensor mounting bracket
(P/N 107-0172-501) using four 3/8”-16 x 1-1/4” hex bolts (P/N 311-0054-081) and four 3/8”-16 zinc flanged lock
nuts (P/N 312-1001-164).
2. Mount the center sensor assembly to the right side of the center rack using two 2-9/16” W x 3-1/2” L x 3/8”
thread U-bolts (P/N 107-0171-616) and four 3/8”-16 zinc flanged lock nuts (P/N 312-1001-164).
