C
HAPTER
3
18Case IH Patriot 250/2240/2250 & New Holland SP2500 (80’-100’ Booms) AutoBoom® Installation Manual
6. Install the 90° end of the supplied hydraulic hose (P/N 214-1000-494) on the 90° end of the installed tee fitting.
7. Connect the straight end of the installed hydraulic hose to the fitting installed in Port LF CYL RTN of the
AutoBoom valve.
FIGURE 7. Right Down Hose Installed
8. Trace the machine’s right return hose from the base-end of the right tilt cylinder to the machine’s hydraulic
valve.
9. Disconnect the machine’s right tilt return hose from the machine’s hydraulic valve.
10. Install a 11/16” ORFS M/F 90° swivel elbow fitting in the open port of the machine’s hydraulic valve.
11. Install a 11/16” ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-069) on the installed elbow fitting.
12. Install a 11/16” ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-069) in the open return port of the
machine’s hydraulic valve.
13. Connect the machine’s right return hose to the opposite end of the installed tee fitting.
14. Install the 90° end of the supplied hydraulic hose (P/N 214-1000-494) on the 90° end of the installed tee fitting.
15. Connect the straight end of the installed hydraulic hose to the fitting installed in Port RTCYL RTN of the
AutoBoom valve.
