IP Deskset 47816A-700/710 Manual
V A.1.0
3 |
P a g e
Calls
3.1 This tab is used to modify inbound or outbound call settings.
3.2 For outbound calls a default ringback tone has been preloaded in the unit and is set as a default.
3.3 The ringback tone can also be a custom tone that is uploaded to the unit.
3.4 The outbound ring limit is set as a default to 5. The number of rings can be adjusted from 1-6 or set
for no limit.
3.5 For an inbound call the auto-answer feature is checked as a default.
3.6 The local correct address is used to set.
3.7 The local all-call number is used to place an all-call between all IP Deskset units on the network.
3.8 Correct address hold off is defaulted at 0 ms.
3.9 Digit clear down is set as #. This feature is used to clear out any incorrect digits that have been
dialed.
3.1.0 The number of incoming rings can be set from 1-6 or no limit.
Figure 2. Calls Tab
