IP Deskset 47816A-700/710 Manual
V A.1.0
5 |
P a g e
Accounts
5.1 The accounts tab is used to connect the IP Deskset to a SIP PBX. Each IP Deskset is capable of being
connected to multiple servers. Each account can be retained for future use. There is an option on the
left-hand side of the screen to disable, register or, unregister each account.
5.2 Under the general tab the account name, display name, username and number must be assigned to
the IP Deskset. They can be filled in with the customers unique naming method. They just need to match
what is programmed in the SIP server.
5.3 The domain must match with the server it needs to register to.
5.4 There is a checkbox that will allow or not allow the IP Deskset to register with the domain.
5.5 The password must match with what was assigned within the SIP server.
5.6 Under the topology tab the SIP transport mode is selectable from automatic to TCP.
5.7 The local port may be assigned.
5.8 The unit has a checkbox selectable stun feature.
5.9 Under the QoS tab the SIP and RTP audio can be assigned.
5.1.0 Under the advanced tab the Authorized Username can be assigned.
5.1.1 The proxy and the proxy port can also be assigned. These will need to match with the server.
5.1.2 The registration lifetime can be set. The default is 3600 seconds.
5.1.3 The option to use keep alive can be set by checkbox. Keep Alive will send out a ping to the network
router to let it know that it is still active even when there is no voice traffic.
5.1.4 The Silence Suppression checkbox is also located here. Silence Suppression will stop the IP Deskset
from send out noise across the network which will cause unnecessary network traffic.
Figure 4. Accounts Tab
