CHAPTER 2 INSTALLING and SETTING UP THE UNIT
UNPACKING THE EQUIPMENT
Upon receiving the RFMOW V2, remove it from the shipping container. Remove all packing materials from
inside the RFMOW V2 KIV Carrier. Be sure to retain loose cables and the 41875 KIV adapter board that are
in the Carrier. Inspect for any obvious signs of external damage due to shipping. Retain the original
shipping containers in case the unit needs to be returned to the depot for repair.
INITIAL INSTALLATION AND SETUP
The following sections provide information required for installing, setup, and preparing the Replacement
Frequency Modulated Orderwire (RFMOW V2) Model 41800-002 for use. The information includes:
•
Power distribution and grounding
•
Setup and preparation for use
The RFMOW V2 is designed to be rack-mounted in a standard depth, 19-inch wide equipment rack.
POWER DISTRIBUTION AND GROUNDING
The following subparagraphs describe the power distribution and grounding of the RFMOW V2.
WARNING
Proper grounding is an important safety feature, and must be a primary
consideration in all electrical and electronic equipment installations. Ensure
that all grounding connections are secure and that all grounding cables are kept
out of vehicle and personnel paths.
WARNING
Use extreme care when working around electrical equipment to avoid the
possibility of severe or fatal electrical shock. Remove all jewelry (i.e. rings,
necklaces, etc.) before working with the RFMOW.
WARNING
Ensure that all power connection is properly insulated, clean, and mechanically
secure to prevent personnel injury when the RFMOW V2 is powered up and
operated. When the RFMOW V2 power cable is installed, carefully inspect all
connectors and wiring for worn or broken parts. Make any necessary repairs
3
