Ravelli Sara, Owners And Installation Manual

Page: 38 / 41

36
Page 14
18. Programming & Commissioning
fi
This
pellet approved Solutions
Fire Pellet Only Menues. Fire Pellet the of sections Protected Password to refers section
re installers and technicians will have access to these passwords. If you are
not a Pellet
Solutions. Fire Pellet from fire pellet any commission
or program install, to attempt not do please technician, or installer approved Solutions Fire
18.1 Sara Parameters - version BOX 03
Name Program Unit Value
Before
Programming
After
Programming
Adjusted
Settings
Minutes time out PR01 Min 18
Minutes start PR02 Min 5
Clean frequency PR03 Min 60
Cleaning duration PR04 Sec 20
Screw start PR05 Sec 1.8
Screw power 1 PR06 Sec
2.0
Screw power 2 PR07 Sec
.5
2
Screw power 3 PR08 Sec
3.0
Screw power 4 PR09 Sec
3.5
Screw power 5 PR10 Sec
Re-start threshold PR11 °C 80
No pellet threshold PR12 °C 50
Off threshold PR13 °C 45
Maximum threshold PR14 °C 250
Fan threshold PR15 °C 80
Smoke ignition PR16 RPM 2100
Ignition smoke speed PR17 RPM 1950
1 smoke speed PR18 RPM 1500
2 smoke speed PR19 RPM 1720
3 smoke speed PR20 RPM 1930
4 smoke speed PR21 RPM 2140
5 smoke speed PR22 RPM 2350
Air 1 speed PR23 V 110
Air 2 speed PR24 V 120
Air 3 speed PR25 V 130
Air 4 speed PR26 V 150
Air 5 speed PR27 V 175
Enable glow plug PR28 on / off ON
Suct smoke cleaning PR29 RPM 2800
Screw cleaning PR30 Sec 1.3
Pre-heat glow plug PR31 Sec 150
Screw max load PR32 Min 4
Flame delta PR33 °C 20
Screw ignition PR34 Sec 2.5
Alarms delay PR35 Sec 60
xHZ frequency PR36 Hz 50
4.0