background image

Use and maintenance manual Magnus

Pag.58 

Rev.1 21/04/2021

Connection to the WiFi network

Cliccare in successione            > 

C

ambia

 

Ret

e

 WiFi

.

 

Si aprirà la schermata 

Selezione rete wifi

, cliccare su 

Scansiona reti

WiFi KIT

Ravelli Smart 

Wi-fi

GUIDA RAPIDA ALL’INSTALLAZIONE

cod.2

1

A

B

2

3

4

COLLEGARE IL CAVO DEL MODULO WiFi ALL’INGRESSO 

SERIALE DELLA SCHEDA ELETTRONICA DELL’APPARECCHIO 

(

ESEMPI 

A

 e B)

 

SCARICARE L’APP 

"Ravelli Smart Wi-fi"

 da… 

CONNESSIONE AL MODULO WiFi

 

CONNESSIONE ALLA RETE WiFi 

IT

cod.1

ATTENZIONE! 

Eseguire questa operazione esclusivamente ad apparecchio freddo 

e con spina elettrica disinserita.

Per installare il modulo WiFi è necessario rimuovere, se presente, il 

rivestimento esterno dell’apparecchio.

Per un corretto smontaggio del rivestimento vedere le istruzioni 

relative al kit rivestimento. Riposizionare il rivestimento e 

ricollegare la spina elettrica a operazione conclusa.

Il layout, alcune diciture o alcuni elementi grafici dell’App potrebbero 

differire rispetto alla versione presentata in questa guida.

Aprire l’App e cliccare 

Scan QR Code

, scansionare l’etichetta del modulo WiFi e 

cliccare su 

Accedi

.

selezionare la propria rete WiFi e digitare la password di 

protezione se richiesta. 

Se lo smartphone/tablet non riesce a riconoscere il QR code, è possibile eseguire 

l’accoppiamento manualmente.

Dallo smartphone/tablet, entrare nel menu

Android: Impostazioni -> Connessioni -> Wi-Fi

iOS: Impostazioni -> Wi-Fi

Selezionare la rete “WINET-XXXXXXXX” ed inserire la chiave WPA indicata nell’etichetta del 

dispositivo wi-fi, facendo attenzione ad inserire i caratteri maiuscoli o minuscoli come riportati.

Wi-fi 1

Wi-fi 3

Wi-fi 2

Wi-fi 1

Click in succession           > Networks. The Select wifi network screen will appear. Click Scan for networks:select your WiFi network 

and enter the password if required. Close the App and go to point 5 to register your account.

Appliance eletronic board selection

Click on Model name e.g. KTR-AIR and then click Yes.The screen offers a list of firmware: once you have identified your model, 

click on Select > Yes. Close the App and go to step 6 to register the account.

WiFi KIT

Ravelli Smart 

Wi-fi

cod.2

1

A

B

2

3

4

CONNECT THE WiFi MODULE CABLE TO THE SERIAL INPUT OF 
THE PRODUCT’S ELECTRONIC BOARD (examples A and B)

 

DOWNLOAD THE "Ravelli Smart Wi-fi"  FROM…

CONNECTION TO THE WiFi MODULE

 

CONNECTION TO THE WiFi NETWORK

INSTALLATION QUICK GUIDE

EN

cod.1

CAUTION!

Carry out this operation only with the device cold and with the 

electrical plug unplugged.

To install the WiFi module, the outer cladding of the device must 

be removed if present.

For correct disassembly of the cladding, please see the cladding 

kit instructions. Reposition the cladding and reconnect the 

electrical plug when the operation has been completed.

NOTE: the layout, some of the text or some graphic elements of 

the App may differ from the version shown in this guide.

Open the App and click Scan QR Code, scan the WiFi module label and click 

Join.

Click in succession

            > 

Networks.

 The Select wifi network screen will appear. Click Scan for networks:
select your WiFi network and enter the password if required. Close the  

App and go to point 5 to register your account.

In case your smartphone/tablet fails to recognize the QR code, you can pair 

manually.

From the smartphone/tablet, enter the menu

Android: Settings -> Connections -> Wi-Fi

iOS: Settings -> Wi-Fi

Select the network "WINET-XXXXXXXX" and enter the WPA key indicated on the label of your 

wi-fi device, taking care to enter upper or lower case characters as shown".

Wi-fi 1

Wi-fi 3

Wi-fi 2

Wi-fi 1

Wi-fi 1

5

6

7

8

CONFIRMATION E-MAIL

WiFi DEVICE REGISTRATION

APPLIANCE ELECTRONIC BOARD SELECTION

ACCOUNT REGISTRATION

When you click the link in the confirmation E-mail, the window to 

register the new device will open: click Register your wifi device now!

STEP 2 enter the product serial number and give the module a name (e.g. 

living room stove);

STEP 3 complete with your information, click Next and then Complete 

registration.

A confirmation E-mail will arrive with the registration. Open the E-mail 

and click on the activation link. On your browser, the reserved area will 

open where you can register the WiFi device (see point 8).

STEP 1

enter the MAC address

and Reg Code

(see module label);

Click on Model name e.g.

 

KTR-AIR

 

and then click Yes.

The  screen  offers  a  list  of

 

firmware

:

 once you have 

identified your model, click on  Select > Yes. Close the App and 

go to step 6 to register the account.

Deactivate  the  WiFi  connection  on  your  device,  open  the  App  and 

click Access to cloud. Select Register your account, enter the required 

information (the name must not contain spaces) and click Register.

Summary of Contents for Magnus









































































Reviews: