matching
transformer
matching
transformer
matching
transformer
matching
transformer
matching
transformer
Example diagram constant voltage connections
2) Connecting the audio sources
The next step is adding source input connections. Depending of the type, connect
the output of the audio source to the corresponding input channel.
Before connecting, turn all the channel gain and master volume controls on the
front and rear panel of the amplifier to their minimum setting. Connect all the audio
sources to their corresponding channels. Turn on the power of the amplifier and all
the connected audio sources.
Set the rear panel input gain levels to 50% then slowly raise the master volume
control until the desired sound output level is achieved. Depending of the output
level of the connected sources the input gain may need additional adjustment.
If the signal is too loud or distorted, adjust the input level controls as necessary to
achieve the desired speaker level.
