background image

Media Player 

Button Function

s

Power button for media player, press and hold 

for on/off function

Mode button press to select player functions

Play 

and paused 

control for 

USB

/

SD/MMC

 and 

Bluetooth 

mode

 

Press & Hold: 

Auto scan function for

 tuner 

mode

Previous track when in USB,SD/MMC,Bluetooth Mode

 

Previous stored FM radio station when in FM tuner Mode

Next track when in USB,SD/MMC,Bluetooth Mode

 

Next stored FM radio station when in FM tuner Mode

Increase player volume

Reduce player volume

Repeat 

song

, Repeat 

music f

older, Repeat 

a

ll and 

R

epeat 

o

ff

DO

 

NOT

 

USE

 

USB

 

PORT

 

TO

 

CHARGE

 

OTHER

DEVICES, THIS WILL DAMAGE THE EQUIPMENT

WARNING

Zone 1-4 on/off button:

The different speaker zone outputs (1-4) can be switched on and off by pressing the 

on/off button of the corresponding zone. When the zone (1-4) is enabled the on/off 

button will illuminate green to indicate the zone is on. When the ‘All’ button is 

pressed all zones will turn on or off.

Zone 1-4 (output) volume control:

The output level of each zone (1-4) can be adjusted separately using the individual 

volume knob of each zone. 

Power button:

The power button turns the system on or off.  The power button will illuminate 

green to indicate the power is on and red when the power is off.

Digital Music player:

This is an All-In-One media source has 3 functions including an MP3 player, FM 

tuner and Bluetooth. Player supports MP3, WMA, WAV, FLAC, AAC audio 

formats.

USB/SD/MMC Connections:

Digital music can be played through these inputs, music will automatically start to 

play when the storage medium is connected.

Summary of Contents for RPA120















Reviews: