Loudspeaker output connections:
Main speaker output connections for both low impedance and constant voltage
distributed are on the 4-pin terminal block connector. The zone (1-4)
70V
constant voltage outputs are on an 8-pin terminal block connector. More
information about loudspeaker output connections is described in a further
chapter of this instruction manual.
Output
connection
(RCA jack connectors):
Th
is
connection can be used when expanding your system
.
Connect
additional a
mplifier
s using
the ‘OUT’ of the master amplifier in your
setup.
Balanced line1 / mic inputs 1
,
2
&
3 (combination 6.3 mm & XLR
jack
):
Channels 1, 2 & 3 are
c
ombination connectors accepting both XLR and 6.3 mm
jack plugs. Both inputs will mute all other channels when a signal is present
on the connected microphones/inputs.
Mic 1 and 2 p
hantom power switches
enable
15
V
for
capacitive microphone
s
. Switch 2 will enable phantom power to
Mic input 1, while switch 1 enables phantom power to Mic input 2.
OUTPUT
