Setting up the system
ATTENTION!
Make sure the power of the device is turned OFF before any wiring connections or
adjustments are made.
1) Connecting the Speakers
The speakers connect to the 2 terminal blocks on the back panel of the device.
This device is compatible with low impedance
and
constant voltage
speakers
depending on the projects requirements.
For operating using the low impedance output, speakers with a minimum
impedance load of 4 ohms or greater can be used.
4Ω
8Ω
8Ω
OR
Example diagram low impedance connections
*Please note the positive amplifier output should be connected to the positive
terminal of the speaker and the ground or negative terminal of the amplifier should
be connected to the negative speaker terminal.
ATTENTION
THE
TOTAL
IMPEDANCE
OF
ALL
CONNECTED
SPEAKERS
MUST
BE
GREATER
THAN
THE
RATED
IMPEDANCE
OF
THE
AMPLIFIER
