Operating the Air Cooler
Insert plug to the electrical outlet. Turn the unit on with the power switch. Then it will beep short, and the
temperature display will show the current temperature and the air cooler switches to the stand by position. The
functions of the unit can be controlled via board control panel or by remote control.
Operating the cooling function:
Turn the Change-over switch (5) on cooling position -
1.ON/OFF: Press the “ON/OFF” button on the control panel or press the ON/OFF button on the remote control
to turn the unit on. The unit will start at low speed and normal wind. To switch back to the standby position,
simply press the ON/OFF button on control panel or press the ON/OFF button on the remote control.
2. Speed: Wind speed can be adjusted to 3 levels as low---mid—high by pressing the ‘Speed’ button. Each time
the ‘Speed’ button is pressed, an icon will appear on the screen indicating the current speed level.
3. Wind: Press the ‘Wind’ button to choose the wind type. Each time this button is pressed, an indicator will light
on the screen to indicate the type of wind. There are 3 types of winds to choose
：
Normal—Natural—Sleep
4. Timer: Press ‘Timer’ button to set the fan running time between 0-12 hours, which switches the unit to standby
after preset time. Each time the button is pressed, the hours will increase one by one and the time indicator will
light on the screen.
To cancel the timer, simply press the button until the indicator shows”00”
5. Swing: Press 'Swing' button to change the wind direction. The swing icon will appear on the screen when the
function is activated. Press the button again to stop the oscillation. The vertical direction of air flow can be
adjusted manually by directing the outlet louvers up and down.
6. Cooler: To activate the air cooler function, please press the 'Cooler' button. Water pump will take the water
from the tank and pour it onto the cooling pad. Cooling pad absorbs the heat of the water and the evaporated
air is blown out by the help of fan. The cool breeze blown by the cooler drops the temperature and creates a
relaxing cooling effect.
Caution: If the water level is low or there is no water in the tank, do not activate the ‘Cooler’ function. Check the
water level and add water if needed. Replace the stale water with fresh water. It is recommended to replace
water in the tank at least once in a week.
7.Ionizer: Press ‘Ion’ button to activate the ionizer function. Ion icon on the screen will light and the negative
anion release will start. Anions attract to tiny particles in the air such as dust, pollen, mold spores etc. Which
cause them to become too heavy to remain air borne. This feature let us to have dean air in the environment.
Operating the heating function: only
Turn the Change-over switch (5)on cooling position.
1.ON/OFF: Press the “ON/OFF” button on the control panel or press the ON/OFF button on the remote control
to turn the unit on. The unit will start at normal wind and low heating stage(1000W).
After second press the button, heating will switch off, the fan will work 30 seconds more, then the device will
back to the standby position.
2. Speed: this button is not available
3. Wind/heat: Press the ‘Wind/heat’ button to choose the heating stage. Each time this button is pressed, an
indicator will light on the screen to indicate the type of heating stage. There are 2 heating stages for choose
：
low (1000W)—high(2000W)
